Tripp Lite Hdmi Over Ip Extender Transmitter - 4k, 4:4:4, Poe, 328 Ft. (100 M) - Video/audio/usb/network Extender - Transmitter - Hdmi - Over Cat 5/5e/6 - Up To 328 Ft

Converts HDMI audio/video to an IP-based signal that is transmitted to a receiver 328 ft. away via Cat6 cable or a dedicated Ethernet network switch. Engineered to meet today’s demands of large-scale, multi-display 4K signal transmission, the B162-001-POE is ideal for a wide range of indoor environments, such as trade shows, airports, university campuses, conference centers and shopping centers. Lightweight Compression with Ultra-Low Latency This transmitter uses advanced video lossless compression technology to extend true 4K video at 60 Hz or true 4K video at 30 Hz with 4:4:4 chroma subsampling. Choose from three different levels of video compression rate to match your application, including Smooth, Balance and High Quality. LEDs indicate connection and status. Supports over Ethernet to Save You Money and Give You More Installation Choices When installed in combination with a PoE Ethernet switch in a multipoint-to-multipoint setup, this PoE extender transmitter can be powered through a shielded Cat6 cable, though an external supply is included. over Ethernet gives you the flexibility to install the transmitter in an area away from AC outlets, such as ceilings or high up on a wall or shelf. Note: When is available from both the Cat6 cable and the supply, the supply will receive priority. Limitless Scalability and Flexibility Mix and match the latest 4K displays in simple point-to-point setups or more elaborate multipoint-to-multipoint setups via LAN (local area network) without distance limitations. In conjunction with Tripp Lite’s B162-100-POE extender receivers, this transmitter offers multi-functionality in video wall and daisy-chain applications. Just one click via touch panel or keypad is needed to operate a display, source and related equipment. You can integrate all B162-Series devices in the application to arrange the profile by grouping individual receivers or video walls. Multiple profiles may be arranged to play in any order over a selected period. No Complicated IP Setup Switch effortlessly among input source devices via buttons on the top panel. No extensive IT experience is required to operate. It lets you configure transmitter settings, monitor statuses and create display templates. Daisy-Chain Up to 30 Units Connect multiple B162-100-POE receivers (sold separately) through a dedicated Ethernet network switch. Cabling and system deployment is easy with fewer cables needed. The daisy-chain function is especially ideal for large-scale deployment covering a wide area, such as hotels, airports, shopping malls and expo centers. Note: Only the first level supports PoE. All B162-Series units connected on the second level and above need an external supply. Create a Video Wall The B162-001-POE supports an 8 x 8 video wall (64 displays) in either horizontal or vertical orientation. Switching layout profiles, previewing the wall and dragging-and-dropping input sources is accomplished through the GUI. Embedded Audio Support A separate audio signal may be embedded into the HDMI stream. A 2.0 port allows connection to the source device. A bi-directional IR channel allows IR transmission one way at a time. A bi-directional RS-232 serial port connects a computer for serial control. Note: In order to save bandwidth and optimize video performance, the USB, IR and RS-232 ports are disabled by default. This hdmi over ip extender transmitter - 4k, 4:4:4, poe, 328 ft. (100 m) - video/audio/usb/network extender - transmitter - hdmi - over cat 5/5e/6 - up to 328 ft is a great cables/adapters network cabling accessories item at a reduced price you can't miss. It is a brand new item that comes to you packed well and ships fast!

• Type: AV transmitter
• Maximum resolution: 4096 x 2160 pixels
• Cable types supported: Cat5,Cat5e,Cat6
• Connectivity technology: Wired
• connector type: Type-B
• AC input voltage: 100 - 240 V