GENERAL INTERNATIONAL 2-in-1 Belt & Disc Sander - BD7004
Product details
| Management number | 254296907 | Release Date | 2026/11/07 | List Price | US$53.86 | Model Number | 254296907 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
GENERAL INTERNATIONAL 2-in-1 Belt/Disc Sander was built for versatility with its 0 to 45 degree tilting aluminum work table which can be adjusted for miter polishing. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, an L shaped stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. The 16-1/2 in x 4-7/8 in. belt sander tilts to work both horizontally and vertically for grinding and polishing flat surfaces. It has a 6 inch diameter Aluminum disc backing plate. This heavy duty belt sander is made with a solid cast iron base. The BD7004 Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4 amp 1/2 HP motor and 3450 rpm, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you'll have the power to switch and replace sand paper grits as needed without wasting any time. The belt bed adjusts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you'll have the capacity to sand whatever you need. The sanding disc is accompanied by a sturdy cast-aluminum work table.
Solid cast iron base and housing - 6-inch diameter aluminum disc backing plate - 375 Watt motor, 120Volt ~ 60Hertz, Amp: 4 - Miter gauge, 6-inch peel-and-stick sanding disc - 2-1/4-inch I.D. dust port| Power sander type | Combination Disc & Belt |
|---|---|
| Pad diameter | 6 in |
| Power type | Corded Electric |
| Maximum speed | 3450 rpm |
| Brand | General International |
| Amps | 4 A |
| Rec. use | Wood Working |
| Features | Adjustable |
| Weight | 37 lb |
| Volts | 120 Volts |
| Batteries incl | N |
| Horsepower | 0.5 HP |
| Model | BD7004 |
| Accessories | mitre gauge, l-shaped stop bar, and dust port |
| Extra battery included | N |
| Total count | 1 |
| Assembled product dimensions (l x w x h) | 19.00 x 16.00 x 10.00 in |
| Watts | 375 Watts |
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form